Awning Installation Services

KL Servis Rumah publishes minimum starting prices for every awning scope: small balcony, patio, window and door awnings from RM 380, material rates from RM 18–60 per sq ft depending on the material, car porch awnings from RM 1,800, repairs from RM 280 and outdoor roller blinds from RM 15 per sq ft — see the full price table on this page. The exact figure is confirmed in a fixed, itemised quotation after photos or a site visit, because span, projection, frame and finish, access, drainage and any removal work change the total. Every published rate sits inside the KL/Selangor market ranges for its material.

There is no single best material — the right choice depends on the application, exposure, desired light, appearance, budget and maintenance preference. Polycarbonate is a common, lightweight, translucent choice for porches and yards; metal deck is durable and economical for utility areas but can transmit heat and rain noise; aluminium composite panel (ACP) is opaque, clean and low-maintenance; tempered glass gives a premium, bright finish; and canvas/fabric suits balconies and shopfronts. We recommend the system for your specific site rather than a universal 'best'.

Polycarbonate is widely used in Malaysia because it is lightweight, impact-resistant and available in clear or tinted profiles that let natural light through while shading rain. Clear sheets transmit more light and heat, while tinted or bronze profiles reduce glare and heat gain. Like any roofing material it needs correct slope, sealing and periodic cleaning; long-term performance depends on sheet quality, fixing and maintenance rather than the material alone.

Each has trade-offs. Polycarbonate is lighter and translucent, so it keeps the area brighter and puts less load on the structure, but cheaper sheets can discolour or crack over time and joints must be sealed well. Metal deck is strong, economical and fast to install, but it conducts more heat and can be noisy in heavy rain unless an insulated profile is used, and steel components need anti-rust treatment. For a car porch where heat matters, tinted polycarbonate, insulated metal deck or ACP are commonly considered; we advise based on your site.

A straightforward replacement or small porch awning can often be completed within a day once materials are ready, while larger or custom-fabricated awnings need fabrication lead time plus one or more installation days. The exact timing depends on size, material, access and whether the old awning is removed. We confirm the schedule with your quotation rather than promising a fixed timeframe upfront.

Yes. A car porch is one of the most common awning applications in KL and Selangor. The porch span, wall and beam fixing points, vehicle clearance, drainage and heat exposure determine the frame gauge, projection and material — tinted polycarbonate, ACP or insulated metal deck are popular for parking areas because they reduce heat build-up over the car. We assess the porch before finalising the design.

Yes. We inspect the existing roofing, frame, joints, fasteners, sealants and drainage to see whether the structure is sound or should be replaced. Common reasons for replacement are cracked or yellowed polycarbonate, rusted frames, leaking joints, water pooling on a flat roof, and sagging from insufficient support. The quotation can include removal and disposal of the old awning where agreed.

Awnings are low-maintenance but not maintenance-free. Periodic clearing of leaves and debris from the roof surface and gutters, checking that water still runs off freely, washing dirt or algae off polycarbonate or glass, and touching up any rust spots on steel frames helps the awning last. Leaks usually come from damaged sheeting, ageing sealant, loose fasteners or blocked drainage rather than the material itself, and these should be attended to early.

An awning provides direct shade over the area it covers and keeps rain and direct sun off doors, windows and walls, which can make the covered outdoor space more comfortable. Opaque materials (ACP, metal deck, tinted polycarbonate) block more glare and heat than clear sheets. We do not promise a specific indoor temperature reduction, since that depends on the material, orientation, ventilation and the building itself.

The most useful information is: your location/area, where the awning will go (porch, balcony, window, yard, shopfront), approximate width and projection, photos of the site and fixing points, the material or look you prefer, whether an old awning needs removal, and any management rules that apply. With photos and dimensions many quotations can be prepared remotely; we arrange a free site visit when the project needs it.

Not always. For straightforward replacements or standard applications, clear photos with dimensions may be enough to quote. When the span is large, the fixing points or existing structure are unclear, access is difficult, drainage needs planning, or the design is custom, we arrange a site visit — and site visits and quotations are free across our Klang Valley coverage.

Yes. Outdoor and zip roller blinds are a popular companion to awnings for balconies, patios, windows and shopfronts — adjustable shade, privacy and rain screening that rolls away when not needed. Manual and motorised options are available, and we confirm the suitable system, fabric and fixing for your opening in the quotation. If you live in a managed property, confirm the management (JMB/MC) rules before installing.

Drainage is planned in the design: the awning is given adequate slope so rainwater runs off to the intended side or gutter rather than pooling, joints and wall flashings are sealed, and gutters or downpipes can be added where the volume of water warrants it. Water pooling is usually a sign of insufficient slope or support, and is one of the things we check on old or leaking awnings.

Yes. Frame colour, sheet tint, ACP colour, glass type and the overall profile can usually be chosen to match the house or shopfront, subject to material availability. Custom spans, projections and shapes are fabricated to the site measurements. We discuss options during the design step and quote any custom finishes accordingly.

Across Kuala Lumpur and Selangor the common installations are polycarbonate awnings (clear or tinted), metal deck awnings, aluminium composite panel (ACP) awnings, tempered glass awnings, and canvas/fabric awnings — applied to car porches, entrances, windows, balconies, patios, drying yards, walkways and shopfronts, plus replacements of existing awnings. Manual retractable awnings start from about RM 1,800 and motorised systems from about RM 3,500 (quoted by model and size), while outdoor roller blinds start from RM 15 per sq ft; tell us your application and we will confirm which options suit it.