Skip to main content
2026 pricing guide

How much does Lighting Design & Installation cost in KL & Selangor?

Use this guide to understand fair Klang Valley pricing before requesting a fixed quote. Final cost depends on measurements, access, materials and the actual site condition.

Direct Answer · Jawapan Ringkas · 直接答案

How much does Lighting Design & Installation cost in KL & Selangor?

Lighting Design & Installation in KL & Selangor starts from RM 120; the 4 published rates below are priced per point, per job, per linear ft. Every figure is confirmed in writing before work starts, while access, materials and site condition move the final number — run the Lighting Design & Installation estimator for an instant ballpark, then send photos and measurements for a fixed written quote.

Open the Lighting Design & Installation estimatorWhatsApp for Quote
  • Published rate book
  • Fixed quote in writing
  • No hidden fees
Published rates

Lighting Design & Installation price list

Every figure in this table is the same published rate our estimators and written quotes use — one rate book, three surfaces, no drift.

Lighting Design & Installation price ranges
ScopeOur published rateWhat's covered
LED Downlight InstallationFrom RM 120 / pointCutting and wiring new downlight points with COB LED fixtures, drivers, and proper heat dissipation.
Pendant & Chandelier InstallFrom RM 180Mounting heavy pendants and chandeliers on reinforced ceiling hooks with safety cables.
Cove & Strip LED InstallationFrom RM 22 / ftHidden cove LED strip with aluminum profile, dimmer, and driver concealed in ceiling void.
Smart Lighting & Dimmer RetrofitFrom RM 250 / pointWi-Fi, Zigbee, or DALI smart switches and dimmers compatible with Google Home, Alexa, and Apple Home.

We don't publish third-party market averages for Lighting Design & Installation. Every figure above is a rate we actually charge and confirm in writing before work starts.

Worked example

How a Lighting Design & Installation estimate adds up

At typical quantities, 4 × lED Downlight Installation at RM 120 / point = RM 480, before the condition, access and urgency factors above. The calculator below runs the same math for your exact quantities.

Cost factors

What affects Lighting Design & Installation cost?

We confirm these points before work starts so the quote is clear and approved first.

Property size and measured work area
Surface or fixture condition before work starts
Material grade and brand selected
Condo management rules, lift protection, or difficult access
Emergency versus scheduled appointment timing
Bundled multi-task visit savings
How we price

Where these Lighting Design & Installation prices come from

01One rate book. The table above, the instant calculator and the written quote all read the same published rates, so the price you see here is the price you are quoted.
02Published, not advertised. We publish the lowest real price we charge for each scope. Where a job needs site measurement, we say so instead of inventing a number.
03Fair Klang Valley standard. Ranges beside our rates show what the same job typically costs locally, so you can judge the quote against real market pricing.
04No hidden fees. If site conditions add work, we explain and get your approval before continuing — the written quote never changes behind your back.
Get an accurate quote

What to measure before you call

The fastest way to a fixed price: send photos and these measurements on WhatsApp. We confirm the price before dispatch.

Photos of the affected area from at least three angles, plus one wide shot of the room or exterior
Measurements in the units used above — square feet for surfaces, running feet for edges, point, room or panel counts for fixtures
Material or brand preference — for example paint grade, tile range, or keep our standard choice
Access notes — lift or stairs, parking distance, condo management rules, or whether the unit is occupied during work
Instant estimate

Try the Lighting Design & Installation calculator

Answer a few questions and get a ballpark price from the same published rates — including labour and standard materials.

Open the Lighting Design & Installation estimator

Need an exact Lighting Design & Installation quote?

Send photos, measurements and your area. We confirm the itemised fixed-price quote before work begins.

WhatsApp for Quote

Lighting Design & Installation cost FAQs

What is the starting price for Lighting Design & Installation?
Lighting Design & Installation starts from RM 120. Final cost depends on dimensions, access, materials and the actual site condition.
Are your prices fair for KL & Selangor?
Yes. KL Servis Rumah prices are the fair Klang Valley standard: not inflated, not underpriced, and confirmed before work starts.
Can I get a quote from photos?
For many small jobs, clear photos and measurements help us estimate. Complex leaks, ceilings and exterior access may need an inspection.
Do you charge hidden fees?
No. Additional scope is explained and approved before we continue.
How many downlights do I need per room?
For a typical 12 sqm room with 2.7m ceiling height, we recommend 6 to 9 downlights (3W–5W COB LED) for general lighting. For task-heavy rooms (kitchen, study) we add 2 to 4 spotlights over work surfaces. We provide a free lux calculation with our layout plan.
What colour temperature is best for Malaysian homes?
For living areas, 3000K (warm white) creates a cozy atmosphere. For kitchens, bathrooms, and study rooms, 4000K (neutral white) provides better task visibility. We generally avoid 6500K (cool daylight) in living spaces as it can feel clinical. Many of our clients now use tunable white (2700K–6500K) for flexibility.
Can you install smart lighting in my existing condo?
Yes. Most smart switches retrofit into existing switch boxes without rewiring. We use neutral-wire smart switches (e.g., Aqara, Sonoff, Schneider Wiser) and pair them with your existing Wi-Fi. For dimming we may need to add a compatible dimmer module behind the switch.
Do you offer outdoor and garden lighting?
Yes. We install IP65+ rated outdoor downlights, spike lights, bollard lights, wall washers, and underwater pool lights. All outdoor cabling is run in weatherproof conduit with proper IP-rated junction boxes and RCCB protection.
What the price pays for

The Lighting Design & Installation job, step by step

These are the steps a confirmed Lighting Design & Installation quote covers — the price above buys this work, in this order.

  1. 01

    Lighting Design Brief

    We capture your room dimensions, ceiling height, paint colour, and intended use to recommend the right beam angle, lux level, and colour temperature.

  2. 02

    Layout Plan

    For full installations, we provide a ceiling layout with point positions, switch groupings, and circuit allocation before work begins.

  3. 03

    Cutting & Wiring

    We cut precise downlight holes (typically 75–90mm), pull cables through ceiling voids, and terminate at the junction box or driver.

  4. 04

    Fixture Mounting

    Downlights, pendants, and tracks are mounted using manufacturer-specified clips, screws, or reinforced ceiling hooks for heavier fixtures.

  5. 05

    Dimming & Smart Pairing

    We pair smart switches, configure dimmer curves, and connect to your preferred smart-home platform (Google Home, Alexa, Apple Home, Tuya).

Other services you might need

Browse our other home services across KL & Selangor — fixed pricing and same-day slots available.

Professional Tiling & Tile Repair

View details & pricing

Plaster Ceiling Design & Build

View details & pricing

Wall & Ceiling Skim Coat

View details & pricing

Vinyl, SPC & Laminate Flooring

View details & pricing

Epoxy & Polyurethane Flooring

View details & pricing

Roof Repair & Waterproofing

View details & pricing
+60 11-1662 7349WhatsApp usinfo@klservisrumah.myJalan Kiara, Mont Kiara, 50480 Kuala Lumpur
Get a fixed quote on WhatsApp Call us