Skip to main content
2026 pricing guide

How much does Door Repair & Installation cost in KL & Selangor?

Use this guide to understand fair Klang Valley pricing before requesting a fixed quote. Final cost depends on measurements, access, materials and the actual site condition.

Direct Answer · Jawapan Ringkas · 直接答案

How much does Door Repair & Installation cost in KL & Selangor?

Door Repair & Installation in KL & Selangor starts from RM 250; the 4 published rates below are priced per job. Every figure is confirmed in writing before work starts, while access, materials and site condition move the final number — run the Door Repair & Installation estimator for an instant ballpark, then send photos and measurements for a fixed written quote.

  • Published rate book
  • Fixed quote in writing
  • No hidden fees
Published rates

Door Repair & Installation price list

Every figure in this table is the same published rate our estimators and written quotes use — one rate book, three surfaces, no drift.

Door Repair & Installation price ranges
ScopeOur published rateWhat's covered
Solid Timber Door InstallationFrom RM 550Solid meranti or chengal door with meranti frame, 3 SS304 hinges, architrave, and basic mortice lockset.
Laminate Door InstallationFrom RM 250HDF-skin engineered door with smooth laminate finish, ideal for budget-friendly modern interiors.
Door Planing & AdjustmentFrom RM 120Trimming a door that is scraping the floor or frame, rehanging on existing hinges, and adjusting the lockset.
Fire-Rated Door InstallationFrom RM 9501-hour or 2-hour certified fire door with intumescent seals, suitable for kitchen, staircase, or fire-escape access.
Site-visit quote only

Door Repair & Installation jobs priced after a site visit

These jobs depend on measurement, access or site conditions we can't judge from a message. Send photos on WhatsApp and we confirm a fixed price before work starts.

On quote

Door Replacement

Like-for-like replacement of an existing door leaf on a sound frame — new door supplied, hinges renewed, lockset refitted, and gaps re-set.

On quote

Door Frame Repair & Replacement

Repairing rotted, cracked, or out-of-square timber frames, or supplying a new meranti or PVC frame with architrave when the old one is beyond repair.

On quote

Bathroom & Kitchen PVC Door Replacement

Moisture-proof PVC or aluminium door and frame sets for wet areas, sized to the existing opening and sealed against splash and humidity.

On quote

Sliding & Bi-Fold Door Installation

Top-hung sliding, pocket, and bi-fold door sets with tracks, floor guides, and soft-close hardware for bedrooms, wardrobes, and study rooms.

On quote

Main Entrance Door Installation

Heavier main entrance door sets with reinforced hinges, security lockset preparation, and weather-sealed threshold detailing.

On quote

Door Closer & Hardware Installation

Supply and fitting of door closers, floor springs, stoppers, seals, and drop-down thresholds on existing or newly installed doors.

We don't publish third-party market averages for Door Repair & Installation. Every figure above is a rate we actually charge and confirm in writing before work starts.

Worked example

How a Door Repair & Installation estimate adds up

At typical quantities, 2 × solid Timber Door Installation at RM 550 = RM 1,100, before the condition, access and urgency factors above. The calculator below runs the same math for your exact quantities.

Cost factors

What affects Door Repair & Installation cost?

We confirm these points before work starts so the quote is clear and approved first.

Property size and measured work area
Surface or fixture condition before work starts
Material grade and brand selected
Condo management rules, lift protection, or difficult access
Emergency versus scheduled appointment timing
Bundled multi-task visit savings
How we price

Where these Door Repair & Installation prices come from

01One rate book. The table above, the instant calculator and the written quote all read the same published rates, so the price you see here is the price you are quoted.
02Published, not advertised. We publish the lowest real price we charge for each scope. Where a job needs site measurement, we say so instead of inventing a number.
03Fair Klang Valley standard. Ranges beside our rates show what the same job typically costs locally, so you can judge the quote against real market pricing.
04No hidden fees. If site conditions add work, we explain and get your approval before continuing — the written quote never changes behind your back.
Get an accurate quote

What to measure before you call

The fastest way to a fixed price: send photos and these measurements on WhatsApp. We confirm the price before dispatch.

Photos of the affected area from at least three angles, plus one wide shot of the room or exterior
Measurements in the units used above — square feet for surfaces, running feet for edges, point, room or panel counts for fixtures
Material or brand preference — for example paint grade, tile range, or keep our standard choice
Access notes — lift or stairs, parking distance, condo management rules, or whether the unit is occupied during work
Instant estimate

Try the Door Repair & Installation calculator

Answer a few questions and get a ballpark price from the same published rates — including labour and standard materials.

Open the Door Repair & Installation estimator

Need an exact Door Repair & Installation quote?

Send photos, measurements and your area. We confirm the itemised fixed-price quote before work begins.

WhatsApp for Quote

Emergency Door Repair & Installation in KL & Selangor

For urgent problems, send photos, your area, and a short video if safe. We triage the risk, explain immediate steps, and confirm a fixed emergency quote before permanent work begins.

Urgent response guide

Door Repair & Installation cost FAQs

What is the starting price for Door Repair & Installation?
Door Repair & Installation starts from RM 250. Final cost depends on dimensions, access, materials and the actual site condition.
Are your prices fair for KL & Selangor?
Yes. KL Servis Rumah prices are the fair Klang Valley standard: not inflated, not underpriced, and confirmed before work starts.
Can I get a quote from photos?
For many small jobs, clear photos and measurements help us estimate. Complex leaks, ceilings and exterior access may need an inspection.
Do you charge hidden fees?
No. Additional scope is explained and approved before we continue.
Why is my door scraping the floor suddenly?
Most common cause is humidity-related expansion — Malaysian tropical humidity makes timber doors absorb moisture and swell, especially in bathrooms and kitchens. Other causes include loose hinges (the door is sagging), a settled house frame, or a recently installed floor covering. We assess the cause and either plane the door, rehang the hinges with longer screws, or replace the door entirely if the swelling is too severe.
Can I keep my existing door frame and just replace the door?
Yes, in most cases. As long as the frame is in good condition, square, and the right size, we can hang a new door on the existing frame. This saves the cost of frame replacement and reduces disruption. We measure the existing frame and source a door to fit (or trim the new door to fit).
What is a fire-rated door and do I need one?
A fire-rated door is a certified door and frame system that has been tested to withstand fire for a specified period (typically 1 hour or 2 hours). They are required by Malaysian building regulations for kitchen doors in some condo developments, all doors leading to fire-escape staircases, and certain commercial situations. We supply and install fire-rated doors from brands including Sanitor, Felicia, and local certified manufacturers, with proper intumescent seals and self-closing devices.
Should I choose solid timber or laminate doors?
Solid timber doors (meranti, chengal, oak) are heavier, more sound-insulating, and have a premium feel — they can also be sanded and repainted multiple times. They cost more (RM 550+) and are sensitive to humidity. Laminate/engineered doors are lighter, more dimensionally stable in humid Malaysian weather, easier to maintain, and more affordable (RM 250+). For bedrooms and main doors we recommend solid timber; for bathrooms, kitchens, and rental properties we recommend laminate or PVC.
What the price pays for

The Door Repair & Installation job, step by step

These are the steps a confirmed Door Repair & Installation quote covers — the price above buys this work, in this order.

  1. 01

    Site Measurement & Selection

    We measure the existing door opening (height, width, depth of frame), check the swing direction, and recommend the right door type and size.

  2. 02

    Door Sourcing & Lead Time

    Laminate and engineered doors are available in 3–7 days. Solid timber and custom fire-rated doors take 14–21 days. We provide exact lead times at quotation.

  3. 03

    Old Door Removal

    We carefully remove the old door, hinges, lockset, and (if needed) the architrave. Frames are left in place unless replacement is also requested.

  4. 04

    New Door Installation

    The new door is hung on stainless steel ball-bearing hinges, aligned with even gaps, and the lockset is morticed and fitted. The door is tested for smooth swing and latch.

  5. 05

    Architrave & Finishing

    MDF or solid timber architrave is installed with mitred corners, sealed, and ready for paint. We can also paint the door and frame for an additional fee.

Browse our other home services across KL & Selangor — fixed pricing and same-day slots available.

+60 11-1662 7349WhatsApp usinfo@klservisrumah.myJalan Kiara, Mont Kiara, 50480 Kuala Lumpur
Get a fixed quote on WhatsApp Call us