SPC / Vinyl Flooring Peeling at Edges or Seams — Causes, Fixes & Cost in KL
Flooring edges are lifting, seams opening, or planks are buckling.
Estimated professional fix: RM120–RM950+ depending on area and cause
Lifting SPC or vinyl edges are almost always moisture or movement — a subfloor that was not dry or level, expansion gaps that were too tight, or planks laid under heavy furniture. The fix is to correct the cause, not glue the plank back down, or it will lift again.
Common causes
Professional solutions
Safe DIY checks first
- 1Press the lifted edge — does water or moisture appear?
- 2Check whether skirting is pinning the planks and removing the expansion gap
- 3Look for signs of damp at walls, doors, or the kitchen
- 4Note whether the lifting is one plank or a whole run
When to call a pro
What affects the cost
Re-laying a few planks is the lower end (from RM120). If the subfloor needs drying, levelling, or a moisture barrier, the job moves up toward RM950. We check the subfloor first so the repair actually lasts.
How to prevent it
Related service
This problem usually connects to Vinyl, SPC & Laminate Flooring. Review service scope, pricing, warranty, and process before booking.
View Vinyl, SPC & Laminate FlooringFAQs
Can you repair only the damaged area?
Yes for small areas. Large areas usually need partial or full re-installation.
Do you check moisture before installation?
Always — we test subfloor moisture content before any SPC or vinyl work.