Welding & Metal Fabrication in Taman Melawati — From RM 280
Taman Melawati's mix of Melawati Mall, Zoo Negara, Bukit Tabur properties means Welding & Metal Fabrication often requires local access planning, careful parking or lift coordination, and a tidy handover. Our dispatch desk asks for photos, property type, and exact neighbourhood before assigning a suitable team.
KL Servis Rumah provides on-site and workshop welding and metal fabrication across Kuala Lumpur and Selangor. Our certified welders work with mild steel, stainless steel, and aluminium for residential and light-commercial projects. Services include: custom window grilles, door grilles, main gate fabrication, staircase stringer fabrication, structural steel repair (lintels, beams, columns), fence and railing fabrication, custom brackets and frames, and on-site emergency welding repair. We also fabricate matching metal parts for carpentry or renovation projects (e.g. steel frame for sliding barn door, custom metal kitchen hood, decorative metal panels). All work is finished with anti-rust primer and either powder coating (for factory finish) or weather-resistant enamel paint (for on-site finish).
Find Welding & Metal Fabrication near you — see all covered areasTaman Melawati landmarks and neighbourhoods covered
Planning Welding & Metal Fabrication for a Taman Melawati property
Taman Melawati properties often sit close to hillside humidity, heavy rain and mature plumbing systems. KL Servis Rumah handles exterior repainting, roof and slab leak checks, bathroom waterproofing, ceiling stain repair, pipe replacement and handyman jobs across Melawati, KL East and nearby Ukay Perdana. Our team prioritises waterproofing and drainage checks before cosmetic repainting so problems do not return after monsoon weather.
Taman Melawati is hillside landed stock toward Hulu Kelang. Driveway gradient, retaining walls and monsoon runoff at the car porch are the extras a flat-township quote would not include.
Most landed jobs in Taman Melawati turn on van parking, neighbour-shared walls and whether rain can reach the work face.
For Welding & Metal Fabrication on landed lots in Taman Melawati, unloading space, neighbour-shared boundaries and whether the work touches structure or only finishes are the three questions that separate a clear quote from a vague one.
Crews locating a Taman Melawati job use Melawati Mall and Zoo Negara only as a meeting reference — the quotation still needs the unit or house number, not a landmark name.
Welding & Metal Fabrication scope that fits Taman Melawati
Each item below is a real work option. Use the Taman Melawati site notes to separate required work from add-ons — do not assume every property here has the same conditions.
Custom Window Grille
Powder-coated mild steel window grille in your chosen design (geometric, classic, or modern). Includes anti-rust primer. On a landed Taman Melawati lot, confirm parking, rear access and whether this item is the main job or an add-on.
Main Gate Fabrication
Custom main gate with mild steel frame, infill design of your choice, and hot-dip galvanised + powder-coat finish. On a landed Taman Melawati lot, confirm parking, rear access and whether this item is the main job or an add-on.
On-Site Welding Repair
Emergency or scheduled welding repair at your location — broken hinges, gate, grille, railing, or structural steel. On a landed Taman Melawati lot, confirm parking, rear access and whether this item is the main job or an add-on.
Staircase Stringer Fabrication
Custom mild steel staircase stringer fabricated to your measurements, primed and painted for indoor or outdoor use. On a landed Taman Melawati lot, confirm parking, rear access and whether this item is the main job or an add-on.
Details that shape a Welding & Metal Fabrication quotation in Taman Melawati
Two properties in Taman Melawati can need different methods. A useful quotation separates required work, options and assumptions, then confirms the written figure after a site check.
- Site Visit & Design: We measure, take photographs, capture the design intent (or sketch from a reference), and recommend the right material and finish for the project.
- Quotation & Lead Time: Itemized quote covering material, fabrication labour, finish (primer + powder-coat or enamel), installation, and any access equipment.
- Workshop Fabrication: Components are cut, bent, and welded in our KL workshop. Quality checks are done at every stage. For complex projects we provide progress photos.
- Access in Taman Melawati: floor or lane, van parking, management hours and unloading distance — not only a reference to Melawati Mall.
- Measurements or point counts for Custom Window Grille, plus the exact address or pin so coverage and timing can be confirmed.
Service pricing in Taman Melawati
Custom Window Grille
Powder-coated mild steel window grille in your chosen design (geometric, classic, or modern). Includes anti-rust primer.
Main Gate Fabrication
Custom main gate with mild steel frame, infill design of your choice, and hot-dip galvanised + powder-coat finish.
On-Site Welding Repair
Emergency or scheduled welding repair at your location — broken hinges, gate, grille, railing, or structural steel.
Staircase Stringer Fabrication
Custom mild steel staircase stringer fabricated to your measurements, primed and painted for indoor or outdoor use.
Iron Works
General wrought iron and mild steel works — decorative panels, brackets, frames, trellises, and bespoke metal pieces fabricated to your drawing.
Metal Grille Installation
Installing fabricated window, door, balcony, or air-well grilles onto existing openings, with anti-rust treatment and matching finish.
Metal Gate Repair
Repairing sagging, rusted, or broken gates — hinge renewal, frame straightening, weld repair, and rust treatment with repaint.
Stainless Steel Railing Fabrication
Stainless steel handrails and balustrades for staircases, balconies, and ramps, welded and polished for indoor or outdoor exposure.
Steel Structure & Awning Fabrication
Mild steel awning, canopy, drying-yard, and carport frames fabricated and installed with primer and weather-resistant finish.
Anti-Rust Treatment & Repainting
Wire-brushing, rust conversion, priming, and repainting of existing grilles, gates, railings, and structural steel to extend service life.
More Taman Melawati service pages
Interior, exterior and wall repainting for homes, offices and shops across KL & Selangor, with surface preparation, floor and furniture protection, and clean handover. From RM 450.
Plumbing and leak repair for pipes, taps, toilets, drains, water heaters and pumps across KL & Selangor, with the scope confirmed before work. From RM 280.
Plaster ceiling installation and repair, gypsum partitions, cornices, L-box features and skim finishing for homes and commercial spaces across KL & Selangor. From RM 220.
Bathroom, roof, balcony and concrete waterproofing plus PU injection grouting for leaks across KL & Selangor, selected after assessing the cause. From RM 300.
TV mounting, door and lock repair, furniture assembly, curtain and shelf installation, cabinet adjustments and general maintenance across KL & Selangor. From RM 280.
End-to-end residential and commercial renovation: design, demolition, structural work, electrical, plumbing, painting, and handover. From RM 22,000.
Wiring, DB box upgrades, power point and switch installation, ceiling fan and lighting point setup by ST-licensed electricians. From RM 280.
Instant, storage, and heat-pump water heater supply, installation, repair, and descaling by ST-licensed technicians. From RM 180.
Safe ceiling fan mounting on concrete, plaster ceiling, and condo false ceiling with proper fan hook, regulator, and concealed wiring. From RM 150.
Downlight, track light, pendant, cove, and outdoor lighting design, supply, and installation by ST-licensed electricians. From RM 120 / point.
Floor and wall tiling for new builds, renovations, and repairs. Homogeneous, porcelain, ceramic, mosaic, and large-format slabs. From RM 14 / sq ft.
Modern plaster ceiling with concealed LED trough, tiered design, L-box, and cove lighting for landed and high-rise properties. From RM 10 / sq ft.
Glass-smooth skim coating for walls and ceilings, paint-ready finish, full surface preparation and crack repair. From RM 5 / sq ft.
Modern click-lock flooring for homes and offices. Waterproof SPC, scratch-resistant laminate, and luxury vinyl planks. From RM 14 / sq ft.
Heavy-duty epoxy floor coating for garages, warehouses, factories, showrooms, and commercial kitchens. From RM 22 / sq ft.
Roof tile replacement, leak repair, gutter cleaning, flashing, and full torch-on waterproofing for landed properties. From RM 380.
Custom-built and modular kitchen cabinets with stone, solid surface, or laminate countertops. Design, supply, install. From RM 7,500.
Built-in wardrobes, TV consoles, study desks, feature walls, shoe racks, and custom furniture. From RM 300 / linier ft.
Solid timber, engineered, fire-rated, and laminate doors — supply, install, plane, hinge, and lock fitting. From RM 250.
Casement, sliding, top-hung, awning windows — glass replacement, seal repair, handle replacement, and alignment. From RM 200.
Digital smart locks, key cutting, lock replacement, door reinforcement, and emergency lockout service. From RM 180.
Shower screens, glass partitions, aluminium windows, sliding doors, and mirror installation across KL & Selangor. From RM 320.
Hikvision, Dahua, Ezviz, TP-Link, Tuya CCTV supply, install, network setup, and remote viewing. From RM 420 / camera.
Swing, sliding, and folding autogate supply, install, and motor servicing across KL & Selangor. From RM 2,200.
Air-conditioner basic servicing, chemical wash, chemical overhaul, gas top-up, repair, new installation and dismantling for homes and offices across KL & Selangor. From RM 129.
Complete kitchen makeover: hacking, tiling, waterproofing, cabinetry, countertop, plumbing, electrical and lighting across KL & Selangor. From RM 8,000.
Full bathroom and toilet makeover: hacking, waterproofing, tiling, plumbing, sanitary, electrical and ventilation in KL & Selangor. From RM 6,000.
Custom awnings and awning roofing for car porches, entrances, windows, balconies and yards across the Klang Valley (KL & Selangor) — polycarbonate, metal deck, aluminium composite (ACP), glass and fabric systems, plus retractable awnings and outdoor roller blinds, fabricated and installed to suit your site. Starting from RM 380 with per-sq-ft rates for every material, project-quoted with a 12-month workmanship warranty.
Taman Melawati FAQs
How fast can you reach Taman Melawati for Welding & Metal Fabrication?
Timing depends on crew location and traffic, but Taman Melawati is part of our active KL & Selangor dispatch coverage. Same-day slots are offered when available.
Which Taman Melawati neighbourhoods do you cover?
We cover key landmarks and neighbourhoods including Melawati Mall, Zoo Negara, Bukit Tabur, KL East, Ukay Perdana, Wangsa Maju border. Send your exact address on WhatsApp to confirm.
How much does Welding & Metal Fabrication cost in Taman Melawati?
Welding & Metal Fabrication starts from RM 280. Final price is confirmed at our published fair rate after scope, access and materials are checked.
Welding & Metal Fabrication near me in Taman Melawati
Is Welding & Metal Fabrication available near me in Taman Melawati?
Yes. We cover Taman Melawati and nearby landmarks such as Melawati Mall, Zoo Negara, Bukit Tabur, KL East.
How do I confirm nearest dispatch?
Send your exact address or pin location on WhatsApp so we can check the closest available crew.
Will near-me pricing be higher?
No arbitrary uplift. Prices stay the same fair rate, with travel or access factors stated before work begins.